This document was created by man2html using the manual pages.
Section: Linux Module Support (8)
Updated: February 4, 2002
Index Return to NetAdminTools
NAMEmodprobe - high level handling of loadable modules
SYNOPSISmodprobe [-adnqv] [-C config] module [symbol=value ...]
modprobe [-adnqv] [-C config] [-t type] pattern
modprobe -l [-C config] [-t type] pattern
modprobe -c [-C config]
modprobe -r [-dnv] [-C config] [module ...]
- -a, --all
- Load all matching modules instead of stopping after the first successful loading.
- -c, --showconfig
- Show the currently used configuration.
- -C, --config config
- Use the file config instead of (the optional) /etc/modules.conf to specify the configuration. The environment variable MODULECONF can also be used to select (and override) a different configuration file from the default /etc/modules.conf (or /etc/conf.modules (deprecated)).
When environment variable UNAME_MACHINE is set, modutils will use its value instead of the machine field from the uname() syscall. This is mainly of use when you are compiling 64 bit modules in 32 bit user space or vice versa, set UNAME_MACHINE to the type of the modules. Current modutils does not support full cross build mode for modules, it is limited to choosing between 32 and 64 bit versions of the host architecture.
- -d, --debug
- Show information about the internal representation of the stack of modules.
- -h, --help
- Display a summary of options and immediately exit.
- -k, --autoclean
- Set 'autoclean' on loaded modules. Used by the kernel when it calls on modprobe to satisfy a missing feature (supplied as a module). The -q option is implied by -k. These options will automatically be sent to insmod.
- -l, --list
- List matching modules.
- -n, --show
- Don't actually perform the action, just show what would be done.
- -q, --quiet
- Do not complain about insmod failing to install a module. Continue as normal, but silently, with other possibilities for modprobe to test. This option will automatically be sent to insmod.
- -r, --remove
- Remove module (stacks) or do autoclean, depending on whether there are any modules mentioned on the command line.
- -s, --syslog
- Report via syslog instead of stderr. This options will automatically be sent to insmod.
- -t moduletype; --type moduletype
- Only consider modules of this type. modprobe will only look at modules whose directory path includes exactly "/moduletype/". moduletype can include more than one directory name, e.g. "-t drivers/net" would list modules in xxx/drivers/net/ and its subdirectories.
- -v, --verbose
- Print all commands as they are executed.
- -V, --version
- Display the version of modprobe.
- Module names must not contain paths (no '/'), nor may they contain the trailing '.o'. For example, slip is a valid module name for modprobe, /lib/modules/2.2.19/net/slip and slip.o are invalid. This applies to the command line and to entries in the config.
DESCRIPTIONThe modprobe and depmod utilities are intended to make a Linux modular kernel more manageable for all users, administrators and distribution maintainers.
Modprobe uses a "Makefile"-like dependency file, created by depmod, to automatically load the relevant module(s) from the set of modules available in predefined directory trees.
Modprobe is used to load a single module, a stack of dependent modules, or all modules that are marked with a specified tag.
Modprobe will automatically load all base modules needed in a module stack, as described by the dependency file modules.dep. If the loading of one of these modules fails, the whole current stack of modules loaded in the current session will be unloaded automatically.
Modprobe has two ways of loading modules. One way (the probe mode) will
try to load a module out of a list (defined by pattern).
Modprobe stops loading as soon as one module loads successfully.
This could be used to autoload one Ethernet driver out of a list.
The other way modprobe can be used is to load all modules from a list. See EXAMPLES, below.
With the option -r, modprobe will automatically unload a stack of modules, similar to the way "rmmod -r" does. Note that using just "modprobe -r" will clean up unused autoloaded modules and also perform the pre- and post-remove commands in the configuration file /etc/modules.conf.
The combining the options -l and -t lists all available modules of a certain type.
CONFIGURATIONThe behavior of modprobe (and depmod) can be modified by the (optional) configuration file /etc/modules.conf.
For a more detailed description of what this file can contain, as well as the default configuration used by depmod and modprobe, see modules.conf(5).
Note that the pre- and post-remove commands will not be executed
if a module is "autocleaned" by kerneld!
Look for the up-coming support for persistent module storage instead.
If you want to use the pre- and post-install features, you will have to turn off autoclean for kerneld and instead put something like the following line in your crontab (this is used for kmod systems as well) to do autoclean every 2 minutes:
*/2 * * * * test -f /proc/modules && /sbin/modprobe -r
STRATEGYThe idea is that modprobe will look first in the directory containing modules compiled for the current release of the kernel. If the module is not found there, modprobe will look in the directory common to the kernel version (e.g. 2.0, 2.2). If the module is still found, modprobe will look in the directory containing modules for a default release, and so on.
When you install a new linux, the modules should be moved to a directory related to the release (and version) of the kernel you are installing. Then you should do a symlink from this directory to the "default" directory.
Each time you compile a new kernel, the command "make modules_install" will create a new directory, but won't change the "default" link.
When you get a module unrelated to the kernel distribution you should place it in one of the version-independent directories under /lib/modules.
- modprobe -t net
- Load one of the modules that are stored in the directory tagged "net". Each module are tried until one succeeds.
- modprobe -a -t boot
- All modules that are stored in directories tagged "boot" will be loaded.
- modprobe slip
- This will attempt to load the module slhc.o if it was not previously loaded, since the slip module needs the functionality in the slhc module. This dependency will be described in the file modules.dep that was created automatically by depmod.
- modprobe -r slip
- This will unload the slip module. It will also unload the slhc module automatically, unless it is used by some other module as well (e.g. ppp).
/etc/modules.conf (alternatively but deprecated /etc/conf.modules) /lib/modules/*/modules.dep, /lib/modules/*
SEE ALSOdepmod(8), lsmod(8), (8), ksyms(8), rmmod(8).
SAFE MODEIf the effective uid is not equal to the real uid then modprobe treats its input with extreme suspicion. The last parameter is always treated as a module name, even if it starts with '-'. There can only be one module name and options of the form "variable=value" are forbidden. The module name is always treated as a string, no meta expansion is performed in safe mode. However meta expansion is still applied to data read from the config file.
euid may not be equal to uid when modprobe is invoked from the kernel, this is true for kernels >= 2.4.0-test11. In an ideal world, modprobe could trust the kernel to only pass valid parameters to modprobe. However at least one local root exploit has occurred because high level kernel code passed unverified parameters direct from the user to modprobe. So modprobe no longer trusts kernel input.
modprobe automatically sets safe mode when the environment consists only of these strings
HOME=/ TERM=linux PATH=/sbin:/usr/sbin:/bin:/usr/binThis detects modprobe execution from the kernel on kernels 2.2 though 2.4.0-test11, even if uid == euid, which it does on the earlier kernels.
LOGGING COMMANDSIf directory /var/log/ksymoops exists and modprobe is run with an option that could load or a delete a module then modprobe will log its command and return status in /var/log/ksymoops/`date +%Y%m%d.log`. There is no switch to disable this automatic logging, if you do not want it to occur, do not create /var/log/ksymoops. If that directory exists, it should be owned by root and be mode 644 or 600 and you should run script insmod_ksymoops_clean every day or so.
REQUIRED UTILITIESdepmod(8), insmod(8).
NOTESPatterns supplied to modprobe will often need to be escaped to ensure that it is evaluated in the proper context.
BUGSmodprobe [ -V | --version ] should exit immediately. Instead, it prints the version information and behaves as if no options were given.
AUTHORJacques Gelinas ([email protected])
Bjorn Ekwall ([email protected])
- SEE ALSO
- SAFE MODE
- LOGGING COMMANDS
- REQUIRED UTILITIES
Return to NetAdminTools,