Creating a SAN with iSCSI - Part 6 - Setting up a Windows Initiator - Finishing Up Our drive is detected properly now, and we have 3 gigs of unallocated space: Format the disk: If you want the drive to automatically be available at boot, check the box: Let's copy a file over to our iSCSI drive: This drive is treated just like a hardware drive would be, but it is all done over the network. Beginning There are 6 parts to this article: Part 1 - Setting up the Target on GNU/Linux Part 2 - Setting up a Windows Initiator - Initial Install Part 3 - Setting up a Windows Initiator - Finish Install Part 4 - Setting up a Windows Initiator - iSCSI Setup Part 5 - Setting up a Windows Initiator - Creating the Drive Part 6 - Setting up a Windows Initiator - Finishing Up This article comes from NetAdminTools: http://www.netadmintools.com/ The URL for this story is: http://www.netadmintools.com/art376.html Copyright 1997-2008 NetAdminTools.com. Read our Terms of Use.